division of Nickerson Consulting Group

Information Technology Charts - Cisco® & Networking Collection 2

(training, review and corporate topology & process charts)

   

 

 

Purchased charts are printed on high quality color laser paper and are laminated and shipped in protective envelopes.

 

 

PDF documents require Adobe Acrobat Reader, Available free at:
 

 

 

  

 

IP PROTOCOL

 

 

A formatted, network layer, IP version 4 packet is described by field. Each of these fields is listed with possible values, per RFC, and bit lengths. The Address Resolution Protocol (ARP) and Reverse ARP packet is also included with offsets and values.

IPv4 packet & ARP/RARP format

$5.95/chart

 

 

 

 

 

Five classes of IP version 4 are listed by ranges. The network and host sections are graphically listed with an example of IP subnetting using a bit mask.

IPv4 32-bit addressing

$5.95/chart

 

 

 

Multicast protocols, addresses, Cisco setup examples and Cisco show commands are described. Protocols include IGMP v1, IGMP v2 and CGMP.

Multicast Protocols (Cisco)

$5.95/chart

 

 

Cisco’s IOS commands to implement DHCP, dynamic host configuration protocol, are listed and explained. Also the many DHCP options are listed with tag and name. A graphical representation of DHCP message flows between client and server is described – discover, offer, and request.

DHCP Service (Cisco)

$5.95/chart

 

 

 

Data Link Switching Plus, DLSW+, is explained with example Cisco IOS configurations and Cisco troubleshooting commands. Sample output from these DLSW commands is listed with explanations.

Data Link Switching Plus - DLSW+

$5.95/chart

 

 

A formatted DLSW+ SSP switch-to-switch protocol message is described. Message types and DLSW states are listed with small graphic describing the end stations.

DLSW+ SSP Setup Protocol

$5.95/chart

 

 
 

 

CISCO ROUTING

 

 

A summary of Cisco interior and exterior routing protocols are listed with key information such as algorithms, metrics, IP ports and destination addresses. Basic Cisco IP routing commands and terminology are included.

Cisco IOS routing protocols - summary

$5.95/chart

 

 

 

 

 

Distance vector IP routing protocol, RIP, both version 1 and 2, a type of interior protocol is graphically described. The request and response datagram is displayed with offsets, values and protocol timer setting. Cisco IOS RIP configuration and show commands are listed.

RIP - Routing Information Protocol

$5.95/chart

 

 

 

Link-State IP routing protocol – OSPF V2 (Open Shortest Path First), a non-proprietary interior gateway protocol, is described. The multicast packet header is graphical broken down with offset values.

OSPF - Open Shortest Path First

$5.95/chart

 

 

Graphic with text explaining what a multi-area OSPF topology is and its function; router link-state packet types associated with area router types.

OSPF Multi-Area Routing

$5.95/chart

 

 

 

OSPF neighbor states, before adjacency is formed, are described. The states include down, attempt, init, 2-way, exstart, exchange, loading and full.

OSPF Neighbor States

$5.45/chart

 

   

 

Cisco’s proprietary Interior Gateway Routing Protocol, IGRP, is explained and a graphical image of the datagram with its header is displayed. The protocols timers are listed and described with the configuration commands for Cisco’s IOS.

IGRP - Interior Gateway Protocol

$5.95/chart

 

 

EIGRP, Cisco’s proprietary advanced distance interior vector IP routing protocol is described. The protocol’s IP header is graphically listed with offsets and field values. Cisco’s IOS commands used to configure and display status information is provided.

EIGRP - Enhanced IGRP

$5.95/chart

 

 

 

Exterior routing protocol BGP V4, Border Gateway Protocol, is explained with a graphical image of the common header packet in addition to open, update, and notification message types. The six BGP states for peers are listed with Cisco IOS configuration and show commands.

BGPv4 (Border Gateway Protocol)

$5.95/chart

 

 

The six BGP v4 states – Idle, Connect, Active, OpenSent, OpenConfirm, and Established are listed and explained.

BGPv4 Neighbor Stages

$5.45/chart

 

 

 

Advanced Cisco BGP V4 topics are graphically displayed – route reflector, confederations, peer groups, filters. Cisco “set” and “match” route map commands are listed.

BGPv4 - advanced routing topics

$5.95/chart

 

   

 

CISCO OTHER

 

 

Authentication protocols using passwords - PAP and Challenge handshakes – CHAP are described. Both protocols have graphical packets with offsets and bit level values. Cisco IOS PPP authentication implementation commands are listed.

PAP / CHAP - Authentication protocols

$5.95/chart

 

 

 

 

 

Authentication, Authorization and Accounting (AAA) is explained. Cisco ACS – Access Control Server software is described and how it relates to AAA. A comparison of RADIUS and TACACS+ with Cisco IOS coding examples is included.

AAA - Authen., Authoriz. & Acct

$5.45/chart

 

 

 

Cisco queuing and serial compression types are described with IOS implementation commands. Queuing types include – the default FIFO, weighted fair, priority, and custom. Compression of header, payload, or link forms is described. In addition, the two compression types are listed: Stac and Predictor.

Queuing and Compression

$5.95/chart

 

 

 

Cisco NAT and PAT, Network and Port level Address Translation is described for both static and dynamic types. Cisco commands for configuration and troubleshooting are listed. A graphic is provided to illustrate the terminology.

NAT / PAT Address Translation

$5.45/chart

 

 

Cisco IOS commands used to provide fault-tolerant designs is listed - data-link and network layers. Methods include - Proxy ARP (router default, 4 hours), IRDP - ICMP Router Discovery Protocol, and HSRP - Hot Standby Routing Protocol (virtual router).

Cisco Fault-Tolerant Routing

$5.45/chart

 

 

 

Cisco’s 16-bit NVRAM configuration register format is graphically displayed with offsets. At boot-up, these bits indicate where the IOS file is and other important information.

Cisco Configuration Register Bits

$5.95/chart

 

 

The format of Cisco’s extended IP access list is graphically laid out with values and field descriptions. Examples are listed; various rules described and show commands are explained. Also access list numbers with corresponding protocol types are documented.

Cisco Router Access Lists

$5.95/chart

 

 

 

Router "Switching" Processes

$5.45/chart

 

 

Cisco Multi-Layer Switching

$5.45/chart

 

 

 

AppleTalk Protocol

$5.45/chart

 

 

AppleTalk Troubleshooting

$5.45/chart

 

 

Novell IPX Protocol

$5.45/chart

 

 

Novell IPX Troubleshooting

$5.45/chart

 

 

Cisco Troubleshooting Commands

$5.45/chart

 

 

 

Multiple Cisco supported voice codec algorithms are listed and described. Algorithms include G.711 Mu-Law and A-Law, G.726, G.729a, Intel Dialogic OKI ADPCM 6 and 8 kHz, and GSM 6.10.

Cisco Voice Codec Algorithms

$5.95/chart

 

 

 

Cisco NetFlow IOS configuration parameters are listed with associated show commands. NetFlow provides statistics on packets that flow through the router. NetFlow collects statistics globally from traffic that flows through the switch and stores the statistics in the NetFlow table.

Cisco IOS NetFlow Configuration

$5.95/chart

 

 

 

CBWFQ - Class Based Weighed Fair Queueing

$5.95/chart

 

 

 

 

  
    Disclaimer: This website and the materials offered herein are neither affiliated with nor endorsed by Cisco® Systems Inc. "Cisco(tm),"  is a trademark owned by Cisco® Systems Inc.

 

        
  © 2005-2007 Nickerson Consulting Group